ANALYSIS OF GAS-DYNAMIC PROCESSES AND THEIR CONTROL METHODS IN THE AREA OF CLEANING OPERATIONS
Abstract
The coal industry's development strategy is inextricably linked to increasing the load on underground working faces and designing mining areas with a minimum capacity of 2-3 million tons of coal per year. However, technical upgrades focused on high-performance equipment, coupled with increased mining depths, have led to a significant increase in methane emissions into mine workings. Under these conditions, safe mining of methane-rich coal seams is only possible with the use of effective gas management methods in mining areas.
References
1. Preparation and development of high-gas-
2. bearing coal seams: Reference guide / A.D. Ruban, V.B. Artemyev, V.S. Zaburdayev, et al. – M.: Gornaya kniga, 2010. –
3. p.
4. Puchkov L.A., Slastunov S.V., Koli-
5. kov K.S. Extraction of methane from coal-
6. beds. – Moscow: Publishing House of the Moscow State Mining University,
7. – 383 p.
8. Vanzha Yu.P. Forecasting of gas-
9. release and control of gas-dust-air environment in mines. – Tomsk: Tomsk University Press, 1995. – 147 p.
10. Ayruny A.T. Theory and Practice of Combating Mine Gases at Great Depths. – Moscow: Nedra, 1981. – 335 p.
11. M o r e v A.M., E v s e e v I.I. Degassing of
12. close-lying layers. – M.: Nedra, 1975. –
13. p.
14. M y a s n i k o v A.A., K o l o t o v k i n
15. L.D. Combating gas in mine workings. – Kemerovo: Kemerovo Book Publishing House, 1975. – 108 p.
16. Degassing of methane-bearing coal seams and host rocks at Kuzbass mines. History. Reality. Future: Monograph
Review
For citations:
Pozdeev I. ANALYSIS OF GAS-DYNAMIC PROCESSES AND THEIR CONTROL METHODS IN THE AREA OF CLEANING OPERATIONS. Bulletin of the Siberian State Industrial University. 2013;(4):25-29. (In Russ.)
Views:
3
Email this article 