REGULARITIES OF THE STRESS-DEFORMED STATE OF METAL DURING WIRE ROLLS
Abstract
One of the most difficult problems in rolling theory is the determination of the stress-strain state of metal during deformation in grooves, which is explained by the complexity of the mathematical apparatus necessary to describe the processes of metal deformation in grooves, taking into account the entire variety of acting factors. Since the indicators of the stress-strain state of metal characterize the tendency of deformed blanks to the formation and development of defects, the calculation of such indicators is important in the design of roll grooves and rolling modes.
About the Authors
A.A. Umansky
Siberian State Industrial University
Russian Federation
Russian Federation
V.N. Kadikov
Siberian State Industrial University
Russian Federation
Russian Federation
Yu.A. Martyanov
Siberian State Industrial University
Russian Federation
Russian Federation
References
1. Kolmogorov, V.L. Mechanics of Metal Pressure Processing. Moscow: Metallurgy, 1986. 688 p.
2. Kinzin D.I., Rychkov S.S. Evaluation of the Effectiveness of Calibration of Sorting Profiles Based on the Deform 3d Software Complex // Modeling and Development of Plastic Deformation Processes. 2011. No. 1. Pp. 92-95.
3. Shilov V.A., Litvinov R.A., Schwartz D.L. Modeling the Rolling Process of Rails in Universal Calibers // Rolling Production. 2009. No. 8. Pp. 20 – 25.
4.
5. T i n i g i n A.N. Modeling of the process of rolling high hot strips fed buttwise into the deformation cell // Steel. 2012. No. 7. Pp. 31 – 34.
6. S alganik V.M., Pesin A.M., Chikishev D.N., Pustovoytov D.O. Modeling the behavior of transverse angular slab cracks during rolling in horizontal rolls // Izv. vuz. Chernaya metallurgiya. 2010. No. 3. Pp. 22 – 24.
7. Zilberg Yu.V., Revyakin S.V. Shape Change of Surface Defects During Rolling in Simple Calibers // Metallurg.
Review
For citations:
Umansky A., Kadikov V., Martyanov Yu. REGULARITIES OF THE STRESS-DEFORMED STATE OF METAL DURING WIRE ROLLS. Bulletin of the Siberian State Industrial University. 2013;(4):8-11. (In Russ.)
Views:
5
Email this article 