Preview

Bulletin of the Siberian State Industrial University

Advanced search

RESEARCH OF THE TRANSIENT PROCESS IN THE CURRENT CHAIN OF THE DRIVE ELECTRIC MOTOR IN CASE OF TURBOCOMPRESSOR FAILURE

Abstract

Turbochargers are widely used in the chemical, metallurgical, and mining industries. Turbochargers are centrifugal compressor machines used primarily for This is especially true when large volumes of gas are supplied at a pressure of 0.15 ‒ 1.00 MPa. Compression occurs due to the release of gas by the working wheels in the radial direction under the action of centrifugal force. For greater efficiency, turbo compressors are made multi-stage: several impellers are mounted on a common shaft, separated from each other by diffusers. The stages are arranged in series, and the pressure of the compressed gas increases from the first to the last stage. Between some stages, the compressed gas is cooled in heat exchangers.

About the Authors

E.V. Pugachev
Siberian State Industrial University
Russian Federation


M.V. Kiperwasser
Siberian State Industrial University
Russian Federation


A.V. Gerasimuk
Siberian State Industrial University
Russian Federation


References

1. E c k e r t B. Axial and Centrifugal Compressors / Translated from German; Translated by E.S. Frolov and B.D. Zakharov. ‒ Moscow: GNTI Mashinostroitelnaya Literatura, 1959. ‒ 678 p.

2. Pugachev E.V., Kipervasser M.V., Inzhelevskaya O.V.

3. Methodology of Automatic Recognition of Emergency Situations

4. of Compressor Station Equipment // Vestnik KuzGTU. 2011. No. 4. Pp. 51 ‒ 55.

5. Pugachyov E.V., Kipervasser M.V., Anikanov D.S. Control of the performance of conveyor transport by means of registration of parameters of elec

6. Shlipchenko Z.S. Pumps, compressors and fans. ‒ Kiev: Tekhnika, 1976. ‒ 368 p.

7. Bystritsky, G.F. Fundamentals of Energetics: Textbook. 3rd ed., ster. ‒ Moscow: KNORUS, 2012. ‒ 352 p.

8. Gorev, A.A. Transient Processes of Synchronous Generators. ‒ Moscow: GEOI, 1960. ‒ 551 p.

9. Ch e r n s x I.V. Modeling of electrical

10. engineering devices in MATLAB.

11. SimPowerSystems and Simulink. Moscow: DMK

12. Press, 2007. – 288 p.


Review

For citations:


Pugachev E., Kiperwasser M., Gerasimuk A. RESEARCH OF THE TRANSIENT PROCESS IN THE CURRENT CHAIN OF THE DRIVE ELECTRIC MOTOR IN CASE OF TURBOCOMPRESSOR FAILURE. Bulletin of the Siberian State Industrial University. 2015;(2):45-48. (In Russ.)

Views: 3


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2304 - 4497 (Print)
ISSN 2307-1710 (Online)