THERMALLY ACTIVATED PROCESSES DURING HOT DEFORMATION OF STEEL 08X18N10T
Abstract
The accuracy of calculations of energy and force parameters of various metal processing processes by pressure depends to a large extent on the accuracy of determination of the value of the resistance to deformation (flow stress). The value of the flow stress depends in general on the type of crystal lattice, chemical composition, structure, degree of deformation, temperature and rate of deformation.
About the Authors
M.V. Filippova
Siberian State Industrial University
Russian Federation
Russian Federation
M.V. Temlyantsev
Siberian State Industrial University
V.N. Peretyatko
Siberian State Industrial University
Russian Federation
Russian Federation
References
1. Polukhin P.I., Gorelik S.S., Vorontsov V.K. Physical Foundations of Plastic Deformation. Textbook. – Moscow: Metallurgy, 1982. – 584 p.
2. Development of the Theory and Practice of Metallurgical Technologies: Monograph in 3 Volumes / Edited by V.N. Peretyatko, E.V. Protopopov, and I.F. Selyanin. Vol. 2: Plasticity and Fracture of Steel in Heating and Pressure Processing / V.N. Peretyatko, M.V. Temlyantsev, and M.V. Filippova. Moscow: Teplotekhnik, 2010. 352 p.
3. Lozinsky, M.G. Structure and Properties of Metals at Elevated Temperatures. Moscow: Metallurgy, 1963. 536 p. Sokolov, L.D. Resistance of Metals to Plastic Deformation. Moscow: Metallurgy, 1963. 284 p. Thermally Activated Processes in Crystals: A Collection of Articles. Translated from English. Edited by
4. A.N. Orlova, Moscow: Mir Publ., 1973– 312 p.
5. B e r n s t e y n M.L., Z a y m o v s k i y
6. V.A., K a p u t k i n a L.M.
7. Thermomechanical processing of steel. – M.: Metallur
8. gia, 1983. – 480 p.
9. High temperature plastic
Review
For citations:
Filippova M., Temlyantsev M., Peretyatko V. THERMALLY ACTIVATED PROCESSES DURING HOT DEFORMATION OF STEEL 08X18N10T. Bulletin of the Siberian State Industrial University. 2015;(2):33-37. (In Russ.)
Views:
3
Email this article 