PRACTICE OF RECOVERY OF GEARS BY WELDING METHODS
Abstract
The technology of restoration and protection of gears, worn gears by welding is described. Provides information about the welding materials used in the restoration of gears. Examples of restored teeth and gears are shown.
The technology of restoration and protection of gears, worn gears by welding is described. Provides information about the welding materials used in the restoration of gears. Examples of restored teeth and gears are shown.
The technology of restoration and protection of gears, worn gears by welding is described. Provides information about the welding materials used in the restoration of gears. Examples of restored teeth and gears are shown.
About the Authors
Sergei V. Raikov
West 2002 LLC
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Associate Professor, General Director
Yuliya A. Shlyarova
Siberian State Industrial University
postgraduate student of the Department of Natural Sciences n.a. Professor V.M. Finkel
References
1. Catalog of Castolin&Eutectic surfacing materials. Switzerland. 2000, 115 p.
2. ESAB product catalog. Welding materials. Moscow: 2016, 268 p.
3. Catalog of welding equipment and materials of Lincoln Electric. Apex. Moscow: 2012, 172 p.
4. Catalog. Electrodes for manual arc welding. Losinoostrovsky electrode plant. Moscow: 118 p.
Review
For citations:
Raikov S., Shlyarova Yu. PRACTICE OF RECOVERY OF GEARS BY WELDING METHODS. Bulletin of the Siberian State Industrial University. 2022;(2):39-46. (In Russ.)
Views:
12
Email this article 