STRUCTURE OF COMPOSITE COATINGS FROM NON-ADMIXTURED COMPONENTS OF THE Cu-Mo SYSTEM, OBTAINED BY ELECTROEXPLOSIVE SPUTTERING AND SUBSEQUENT ELECTRON-BEAM PROCESSING
Abstract
Composite materials of the molybdenum-copper system have resistance to electrical erosion, an order of magnitude higher compared to the resistance of contact copper. Currently, the physical basis of the electro-explosive spraying (EES) of molybdenum-copper coatings has been developed. A promising direction in the development of EES methods for composite materials is the modification of these coatings by high-intensity electron beams.
About the Authors
A. N. Romanov
Siberian State Industrial University
Russian Federation
Russian Federation
О.V. Olesyuk
Siberian State Industrial University
Russian Federation
Russian Federation
E.A. Budovskikh
Siberian State Industrial University
Russian Federation
Russian Federation
V.E. Gromov
Siberian State Industrial University
Russian Federation
Russian Federation
Yu.F. Ivanov
Institute of High-Current Electronics, Siberian Branch of the Russian Academy of Sciences (Tomsk)
Russian Federation
Russian Federation
A.D. Terezov
National Research Tomsk Polytechnic University
Russian Federation
Russian Federation
References
1. Anisimov, A.G., and Mal, V.I. Research on the Possibility of Electroimpulse Sintering of Powder Nanostructured Composites. Physics of Combustion and Explosion.
2. No. 2. Pp. 135 – 139.
3. Gromov V.E. Electroexplosive spraying
4. of electroerosion-resistant coatings:
5. formation of structure, phase composition,
6. and properties of electroerosion-resistant coatings
7. by the method of electroexplosive spraying. – Saarbrucken: LAP LAMBERT Academic
8. Publishing GmbH & Co. KG, 2012. –
9. p.
10. R o t s h t e i n V., I v a n o v Yu., M a rk
11. o v A. – Chapter 6 in Book "Materials surface
12. processing by directed energy techniques
13. " / Ed. by Y. Pauliau. – Elsevier, 2006.
14. P. 205-240.
15. Physical fundamentals of electro-
16. explosive treatment of metals and alloys / A.Ya. Bagautdinov
17. , E.A. Budovskikh, Yu.F. Ivanov,
18. V.E. Gromov. Novokuznetsk: Publishing house. SibGIU,
19. 301 p.
20. I v a n o v Yu.F., K o v a l n.N. Low-
21. energy electron beams of sub-
22. millisecond duration: production
23. and some aspects of application.
Review
For citations:
Romanov A., Olesyuk О., Budovskikh E., Gromov V., Ivanov Yu., Terezov A. STRUCTURE OF COMPOSITE COATINGS FROM NON-ADMIXTURED COMPONENTS OF THE Cu-Mo SYSTEM, OBTAINED BY ELECTROEXPLOSIVE SPUTTERING AND SUBSEQUENT ELECTRON-BEAM PROCESSING. Bulletin of the Siberian State Industrial University. 2014;(1):7-10.
Views:
1
Email this article 