ASSESSMENT OF THE LOADING OF ROLLING CAGE ELEMENTS CONNECTED BETWEEN EACH OTHER THROUGH THE ROLLED STRIP
Abstract
Dynamic processes in continuous rolling mills are usually determined by the nature of technological loads in the rolling transition zones. In the future, these processes extend to a significant part of the stable sections of the technological process, thereby creating additional loads on the drive elements of the machines. The behavior of the strip at the moment when the metal fills the deformation site of the rolling mill is determined by the ratio of the speeds of the strip and the rolls being rolled, the shape of the front end of the strip, and the influence of neighboring cells- tey. In this work , dynamic and mathematical models of the behavior of a group of crates have been developed, taking into account the peculiarities of the work of the roughing group of rolling crates of a continuous-billet mill.
About the Authors
A.N. Savelyev
Siberian State Industrial University
Russian Federation
Russian Federation
N.A. Lokteva
Siberian State Industrial University
Russian Federation
Russian Federation
V.S. Korolev
Siberian State Industrial University
Russian Federation
Russian Federation
References
1. Savelyev A.N., Voskresensky V.A. Dynamics in the main line during the capture of a wedge-shaped ingot // Izv. vuz. Black metal surgery. 1975. No. 10. pp. 92-95.
2. Savelyev A.N., Savelyev An.N. The stadium of dynamics of a muving strip in the steady state of rolling // Steel in the USSR. 1982. No. 10. P.
3. Savelyev A.N., Voskresensky V.A., Peretyatko V.N. Investigation of the process of metal capture by rolls. – In: Proceedings of the Department "Machines and technology of metal processing by pressure" of the Omsk Polytechnic Institute. Omsk: Publishing House. OPI, 1975. pp. 152 – 157.
4. Savelyev A.N., Voskresensky V.A., Peretyatko V.N., Shirokov V.N. Investigation of the capture process of wedge-shaped ingots. – In: Proceedings of the Department "Machines and technology of metal pressure treatment
5. " Omsk Polytechnic Institute. Omsk: Publishing House. OPI, 1975. pp. 158-163.
6. Savelyev An.N., Savelyev A.N., Kirnosov A.M. Changing the dynamic component of loads in the drives of the crates of a continuous billet mill // Izv. vuz. Ferrous metallurgy. 1984. No. 12. pp. 135-137.
7. Savelyev A.N., Lokteva N.A., Beach T.A. Features of operations to develop a method for forming a dynamic model when determining the loading of machine elements: textbook. stipend. Novokuznetsk: Publishing house. SibGIU, 2016. 175 p.
8. Voskresenskiy V.A., Kirnosov A.M. Influence of rolling speed on pressure distribution in external zones of high temperatures. – In: Research and calculation of metallurgical equipment: collection of scientific papers. Novokuznetsk: Publishing house. Mass Media, 1971. pp. 97-102.
9. Savelyev A.N., Stupakov M.I. Determination of dynamic loads in technological equipment. Novokuznetsk: Publishing house. SibGIU, 1995. – 110 p.
10. Statistical analysis and mathematical modeling of bluming / S.L. Kotsar, V.N. Polyakov, Yu.G. Makarov, V.A. Chichigin. - M.: Metallurgiya, 1974. – 280 p.
11. Grudev A.P., Brusenkov I., Shlomchak G.G. Contact stresses during the capture of the pole by rolls // Metal pressure treatment. 1972. No. 58. pp. 231-235.
12. Tofel W., Schneider E. Creifen Von Wolaen Dei weronderlicher Walegeschwindigkeit // Stahl und Eisen. 1924. № 12.
13. Makaev S.V. On the issue of metal capture by bluming rolls // Steel. 1956. No. 12. pp. 1084-1094.
14. Kuprin M.I. Influence of sliding speed on the value of the coefficient of friction during hot rolling. – In: Collection of scientific papers. Magnitogorsk: Publishing House. Magnitogorsk Mining and Metallurgical Institute, 1957. Issue 11. p.
15. Von Kortzfleit. Production studies of capture conditions and the established process during rolling of blumes on a reversing mill
Review
For citations:
Savelyev A., Lokteva N., Korolev V. ASSESSMENT OF THE LOADING OF ROLLING CAGE ELEMENTS CONNECTED BETWEEN EACH OTHER THROUGH THE ROLLED STRIP. Bulletin of the Siberian State Industrial University. 2017;(2):16-20. (In Russ.)
Views:
16
Email this article 