RESEARCH OF METAL FOAMED UNDER THE FLUX MADE ON THE BASIS OF BUCKET ELECTRICALLY MELTING SLAG
Abstract
The study of deposited samples made by surfacing under a layer of flux was carried out. The production of surfacing flux was carried out by mixing ladle electric steelmaking slag with flux additives based on slag from the production of silicomanganese and dust from electrofilters from the production of aluminum. Surfacing was carried out on the surfacing plates made of steel grade 09G2S welding wire SV-08GA. The structure and nonmetallic inclusions of the deposited samples were studied and described by optical microscopy, and the hardness and wear resistance of the deposited surfaces were studied.
About the Authors
N.A. Kozyrev
Siberian State Industrial University
Russian Federation
Russian Federation
A.R. Mikhno
Siberian State Industrial University
V.O. Apanina
Siberian State Industrial University
L.P. Bashchenko
Siberian State Industrial University
R.E. Kryukov
Siberian State Industrial University
Review
For citations:
Kozyrev N., Mikhno A., Apanina V., Bashchenko L., Kryukov R. RESEARCH OF METAL FOAMED UNDER THE FLUX MADE ON THE BASIS OF BUCKET ELECTRICALLY MELTING SLAG. Bulletin of the Siberian State Industrial University. 2020;(4):10-14. (In Russ.)
Views:
4
Email this article 