LATTICE, PHASE COMPOSITION AND STRUCTURE OF THE AK5M2 ALLOY SURFACE-MODIFIED WITH TITANIUM AND SUBSEQUENT ELECTRON BEAM IRRADIATION
Abstract
The parameters of the crystal lattice and the phase composition of the AK5M2 alloy samples surface-modified with titanium, followed by electron beam irradiation, were studied by X-ray phase analysis. The defective substructure of the samples was investigated by scanning electron microscopy. Based on the conducted tests of the AK5M2 alloy samples, surface-modified with titanium, optimal modes of electron beam processing were identified, leading to the formation of the structure characterized by improved mechanical properties in the alloy surface layer.
The parameters of the crystal lattice and the phase composition of the AK5M2 alloy samples surface-modified with titanium, followed by electron beam irradiation, were studied by X-ray phase analysis. The defective substructure of the samples was investigated by scanning electron microscopy. Based on the conducted tests of the AK5M2 alloy samples, surface-modified with titanium, optimal modes of electron beam processing were identified, leading to the formation of the structure characterized by improved mechanical properties in the alloy surface layer.
About the Authors
Anna A. Serebryakova
Siberian State Industrial University
Russian Federation
Russian Federation
Post-graduate student of the Department of Natural Sciences n.a. Professor
V.M. Finkel
Dmitry V. Zagulyaev
Siberian State Industrial University
Candidate of Technical Sciences, Associate Professor of the Department of Natural Sciences n.a. Professor V.M. Finkel
Yulia A. Shklyarova
Siberian State Industrial University
postgraduate student of the Department of Natural Sciences n.a. Professor
V.M. Finkel
Yuri F. Ivanov
Institute of High-Current Electronics SB RAS
Doctor of Physical and Mathematical Sciences, Professor
Viktor E. Gromov
Siberian State Industrial University
Doctor of Physical and Mathematical Sciences, Professor, Head of the Department of Natural Sciences n.a. Professor V.M. Finkel
References
1. Laskovnev A.P., Ivanov Yu.F., Petrikova E.A. et al. Modification of the structure and properties of eutec-tic silumin by electron-ion-plasma treatment. Minsk: Belarus. Navuka, 2013, 287 p. (In Russ.).
2. Volochko A.T. Modification of eutectic and primary silicon particles in silumins. Prospects of development. Lit'e i metallurgiya. 2015, no. 4, pp. 39–45. (In Russ.).
3. Ren X., Wang R., Wei D., Huang Y., Zhang H. Study on surface alloying of 38CrMoAl steel by electron beam. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materi-als and Atoms. 2021, no. 505, pp. 44–49.
4. Xu F., Tang G., Guo G., Ozur G. Influence of irradia-tion number of high current pulsed electron beam on the structure and properties of M50 steel. Nuclear In-struments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms. 2010, no. 15, pp. 2395–2399.
5. Belov A.B., Bytsenko O.A., Krainikov A.V.; Novikov A.S., Shulov V.A., Engel'ko V.I. ed. High-current pulsed electron beams for aircraft engine building / M.: Dipak, 2012, 292 p. (In Russ.).
6. Kovalʹ N.N., Ivanov Yu.F. ed. Electron-ion-plasma modification of the surface of non-ferrous metals and alloys. Tomsk: Izd-vo NTL, 2016, 312 p. (In Russ.).
7. Barrirero J. Eutectic Modification of Al–Si casting alloys. Materials Science. 2019. 113 p.
8. Fedun V., Kolyada Yu. Dynamics of phase transfor-mations during surface modification of metals and al-loys by an electron beam. Voprosy atomnoi nauki i tekhniki. 2010, no. 7, pp. 316–320. (In Russ.).
9. Bratushka S., Malikov L.V. Ion-plasma modification of titanium alloys. Problems of Atomic Science and Technology. 2021, pp. 126–140.
10. Andrianova N., Borisov A., Krit B., Mashkova E., Ovchinnikov M., Timofeev M., Umarov F. Ion-plasma modification of the surface of light fiber materials. Journal of Physics: Conference Series. 2020, no. 1713, pp. 012006.
11. Ivanov Yu., Klopotov A., Potekaev A., Koval N., Vlasov V. Electron-ion-plasma modification of the structure and properties of commercial steels. IOP Conference Series: Materials Science and Engineer-ing. 2017, no. 168, pp. 012070.
12. Inkson B.J. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) for materials characterization. Materials Characterization Using Nondestructive Evaluation (NDE) Methods Elsevier Ltd. 2016, pp. 17–43.
13. Publisher B. Fundamentals of X-Ray Phase Analysis. Multifunctional two-and three-dimensional pol-ycrystalline x-ray diffractometry. 2012, pp. 34–41.
Review
For citations:
Serebryakova A., Zagulyaev D., Shklyarova Yu., Ivanov Yu., Gromov V. LATTICE, PHASE COMPOSITION AND STRUCTURE OF THE AK5M2 ALLOY SURFACE-MODIFIED WITH TITANIUM AND SUBSEQUENT ELECTRON BEAM IRRADIATION. Bulletin of the Siberian State Industrial University. 2022;(1):63-68. (In Russ.)
Views:
10
Email this article 