SCIENTIFIC SCHOOL OF WESTERN SIBERIA IN THE FIELD OF HEAVY TECHNOLOGICAL EQUIPMENT
Abstract
The importance for the successful existence of the department of gradually accumulating experience in the development of scientific products and the constant reproduction of scientific personnel is shown. Scientific work allows the department, as a scientific school, to plan for the coming years the types of work on solving urgent scientific problems related to technological equipment, and to train scientific staff for this field of scientific activity. All this inspires confidence that the scientific school, which was founded in the distant thirties of the XX century, steadily developed and, having formed, took a worthy place in the scientific community of our country, will successfully continue its activities. The tasks solved by the department as a scientific school in recent decades can be designated as problems of theory and practice aimed at the formation of complex technical and socio-technical systems of the required efficiency. It is emphasized that technical and industrial complexes are currently being studied by the staff of the department as complex, interconnected, synchronously operating energy systems. The scientific school of the department is engaged in the development of knowledge that will eventually form production complexes with a rational layout and the currently required performance.
About the Authors
Aleksei B. Yur’ev
Siberian State Industrial University
Russian Federation
Russian Federation
Dr.Sci. (Eng.), Associate Professor, Rector
Alexander N. Saveliev
Siberian State Industrial University
Cand. Sci. (Eng.), hanical Engineering
Sergey V. Konovalov
Siberian State Industrial University
Dr. Sci. (Eng.), Professor, Acting Head of the Department of Mechanics and Mechanical Engineering
References
1. Kunitsin N.M., Shamovskii E.Kh., Yakovlev I.M., Soroko L.N. Design of a wide-reach cutter for fire stripping of metal. Izvestiya. Ferrous metallurgy. 1958, no. 3, pp. 154–160. (In Russ.).
2. Shamovskii E.Kh., Yakovlev I.M., Kaf-tanova Z.K. Removal of splashes during fire stripping of metal. Izvestiya. Ferrous metallurgy. 1958, no. 4, pp.117–126. (In Russ.).
3. Shamovskii N.M., Yakovlev I.M. Broadband coke-oxygen cutter for machine fire stripping of cold carbon metal. Izvestiya. Ferrous metallurgy. 1961, no. 10, pp. 165–169. (In Russ.).
4. Sokolov L.D. Specific pressures when rolling large shaped profiles. Byulleten' TsNII informatsii i tekhniko-ekonomicheskikh issledovanii chernoi metallurgii. Минчермет СССР. 1946, no. 6(50), pp. 25–26. (In Russ.).
5. Golubev T.M., Sokolov L.D. Investigation of specific pressures of chromium and copper steel. Stal'. 1950, no. 9, pp. 818–820. (In Russ.).
6. Golubev T.M., Sokolov L.D., etc. Energy indicators of rolling on a rail-block mill. Stal'. 1950, no. 5. (In Russ.).
7. Sokolov L.D. On the issue of determining specific pressures during rolling in shaped calibers. Izvestiya. Ferrous metallurgy. 1958, no. 6, pp. 109–116. (In Russ.).
8. Sokolov L.D. On the stress state criteria of the mechanical deformation diagram. Doklady AN SSSR. Novaya seriya. 1952, vol.87, no. 6, pp. 905–908. (In Russ.).
9. Sokolov L.D., Grebenik P.M., Tylkin M.A. Research of rolling equipment. Moscow: Metallurgiya, 1964, 487 p. (In Russ.).
10. Veksin I.N., Grebennik V.M., Sokolov L.D., Shirokov V.N. Investigation of the bearing capacity of the cold rolling sheet mill 425. Izvestiya. Ferrous metallurgy. 1958, no. 1, pp. 160–178. (In Russ.).
11. Baklushin I.L., Veksin I.N., Grebennik V.M., Lyulenkov V.I., Sabantsev V.P., Sokolov L.D., Shirokov V.N. Equipment for working with wire resistance sensors. Izvestiya. Ferrous metallurgy. 1958, no. 6, pp. 149–154. (In Russ.).
12. Grebennik V.M. On the methods of ac-counting for various factors in strength calculations. Izvestiya. Ferrous metallurgy. 1958, no. 7, pp. 168–175. (In Russ.).
13. Grebennik V.M. On the issue of determining the margin of safety. Izvestiya. Ferrous metallurgy. 1959, no. 3, pp.137–142. (In Russ.).
14. Grebennik V.M. Calculation of the du-rability of parts under non – stationary variable loads. Izvestiya. Ferrous metal-lurgy.1959, no. 10, pp. 147–160. (In Russ.).
15. Grebennik V M. On the systems of coef-ficients used in strength calculations. Izvestiya. Ferrous metallurgy. 1962, no. 12. (In Russ.).
16. Grebennik V.M. Fatigue strength and durability of metallurgical equipment. Moscow: Mashinostroenie, 1969, 256 p. (In Russ.).
17. Grebennik V.M., Tylkin M.A., Kucherenko V.F., Chernevich E.M. Analysis of breakdowns of metallurgical equipment parts. Izvestiya. Ferrous metallurgy. 1962, no. 8, pp. 175–182. (In Russ.).
18. Ledenev Yu.N. To the calculation of closed-type rolling mills. Izvestiya. Ferrous metallurgy. 1958, no. 10, pp. 169–179. (In Russ.).
19. Ledenev Yu.N. To the calculation of flat mills of rolling mills by the method of grids . Izvestiya. Ferrous metallurgy. 1958, no. 11, pp. 125–134. (In Russ.).
20. Savel'ev N.M. Investigation of pressing stresses. Ogneupory. 1962, no. 8. (In Russ.).
21. Savel'ev N.M. Refractories from low-plastic coarse-grained masses. 1962, no. 4. (In Russ.).)
22. Baklushin I.L., Veksin I.N., Lyulenkov V.I., Sabantsev V.P., Sobolev A.P., Sokolov L.D., Shirokov V.N. Analysis of the strength re-serves of the bluming bed "1100" KMK. Izvestiya. Ferrous metallurgy. 1964, no. 2, pp. 205–212. (In Russ.).
23. Baklushin I.L., Veksin I.N., Grebenik V.N., Lyulenkov V.I., Sabantsev V.P., Sokolov L.D., Shirokov V.N. Investigation of the cold rolling mill 740 sheet. Izvestiya. Ferrous metallurgy. 1959, no. 8, pp. 143–148. (In Russ.).
24. Sharapov V.A., Lyulenkov V.I. On the question of the optimal weight of counterloads of the tilting mechanism of the tower-type car dumper. Izvestiya. Ferrous metallurgy. 1968, no. 12, pp. 195–199. (In Russ.).
25. Sharapov V.A., Lyulenkov V.I. Investi-gation of the mechanism of tilting of a tower-type car dumper. Izvestiya. Ferrous metallurgy. 1969, no. 10, pp. 179–182. (In Russ.).
26. Lyulenkov V.I., Seregin S.A. Method of sur-face cleaning of metals and alloys. Certifi cate of authorship USSR no. 270667 USSR. Byulleten' izobretenii. 1970, no. 17. (In Russ.).
27. Ogarkov N.N., Seregin S.A., Lyulenkov V.I., Shirokov V.N. Temperature distri-bution at the contact when cutting st 3 friction discs. Izvestiya. Ferrous metallurgy. 1970, no. 8, pp. 175–177. (In Russ.).
28. Ogarkov N.N., Seregin S.A., Lyulenkov V.I., Shirokov V.N. To the study of friction saws. Izvestiya. Ferrous metallurgy. 1970, no. 6, pp. 177–180. (In Russ.).
29. Seregin S.A., Vershinina L.V., Epifantsev Yu.V. Hardening of the metal surface during processing with a fast-rotating disk. Izvestiya. Ferrous metallurgy. 1970, no. 6, pp. 167–169. (In Russ.).
30. Seregin S.A., Epifantsev Yu.A. Increased wear resistance by high-speed friction. Metallovedenie i termicheskaya obrabotka metallov. 1974, no. 11, pp. 61–63. (In Russ.).
31. Sharapov V.A., Lyulenkov V.I. On the question of the optimal weight of counterloads of the tilting mechanism of the tower-type car dumper. Izvestiya. Ferrous metallurgy. 1968, no. 12. (In Russ.).
32. Sharapov V.A., Lyulenkov V.I. Investi-gation of the mechanism of tilting of a tower-type car dumper. Izvestiya. Ferrous metallurgy. 1969, no. 10, pp. 179–183. (In Russ.).
33. Lyulenkov V.I., Sharapov V.A., Levin V.S., Bardyshev V.G. Investigation of blast furnace loading devices. Izvestiya. Ferrous metallurgy. 1977, no. 6, pp. 174–177. (In Russ.).
34. Levin V.S., Bardyshev V.G., Lyulenkov V.I., Sharapov V.A., Epifantsev Yu.A., Trushevich G.B., Khamitsev Sh.V. Valve-type loading device with a rotating insert and a cone of variable diameter. Izvestiya. Ferrous metallurgy. 1976, no. 6, pp. 175–177. (In Russ.).
35. Trushevich G.B., Baklushin I.L., Shirokov V.N. To determine the optimal counterloads of the lever balancing system. Izvestiya. Ferrous metallurgy. 1971, no.10, pp. 169–170. (In Russ.).
36. Trushevich G.B., Baklushin I.L., Shirokov V.N. Determination of optimal values of the shoulder and counterweight of lever balancing systems. Issledovanie i raschet metallurgicheskogo oborudovaniya. Part 2. Novokuznetsk, 1971, pp. 11–18. (In Russ.).
37. Voskresenskii V.A., Kirnosov A.M., Mizin Yu.G., Kolomnikov G.F., Novikov V.M., Chichigin V.A., Lekhov O.S. Experimental study of the pressure mechanism of the bluming 1300 ZSMK. Izvestiya. Ferrous metallurgy. 1972, no. 4, pp. 175–178. (In Russ.).
38. Voskresenskii V.A., Kirnosov A.M. Pre-loading of the roll with a push mechanism. Issledovanie i raschet metallurgicheskogo oborudovaniya. 1971, no. 2, pp. 275. (In Russ.).
39. Egorov V.F., Lyulenkov V.I., Shirokov V.N., Paunov A.M. To the question of choosing the load diagram of the engine of mechanisms of repeated-short-term operation. Izvestiya. Ferrous metallurgy. 1973, no. 6, pp. 166–170. (In Russ.).
40. Egorov V.F., Lyulenkov V.I., Shirokov V.N., Paunov A.M. Averaging of the shear press drive loads. Izvestiya. Ferrous metallurgy. 1973, no. 8, pp. 179–182. (In Russ.).
41. Savel'ev A.N., Voskresenskii V.A. Dy-namics in the main line when capturing a wedge-shaped ingot. Izvestiya. Ferrous metallurgy. 1975, no. 10, pp. 92–95. (In Russ.).
42. Savel'ev A.N., Voskresenskii V.A., Peretyat'ko V.N. Investigation of the process of metal capture by rolls. In: Collection of works of the department "Machines and technology of metal processing by pressure". Omsk Polytechnic Institute. Omsk, 1975, pp. 152–161. (In Russ.).
43. Lyulenkov V.I., Logunov I.I., Chalkov V.S., Egorov V.F., Trushevich G.B. A method of surface hardening of parts and a device for its implementation. Certifi cate of authorship USSR no. 1230807. 1986, no. 18. (In Russ.).
44. Chalkov V.S., Lyulenkov V.I., Logunov I.I., Savel'ev A.N. Tubular sample for mechanical testing. Certifi cate of authorship USSR no. 1397790. 1988, no. 19. (In Russ.).
45. Lyulenkov V.I., Sharapov V.A., Shinka-renko A.S. Blast furnace loading device. Certifi cate of authorship USSR no. 806768. 1981, no. 7. (In Russ.).
46. Shinkarenko A.S., Igonin I.G., Lyulenkov V.I. Gas sealing valve of the blast furnace filling apparatus. Certifi cate of authorship USSR no. 887861. 1981, no. 45. (In Russ.).
47. Lyulenkov V.I., Sharapov V.A., Shinka-renko A.S. Investigation of the loading device of a blast furnace with a stationary distribution funnel. Izvestiya. Ferrous metallurgy. 1977, no. 12, pp. 161–163. (In Russ.).
48. Lyulenkov V.I. Improvement of loading devices of blast furnaces. In: Proceedings of the VI Scientific and Practical Conference on problems of mechanical engineering, metallurgy and mining machines / Edited by L.T. Dvornikov. Novokuznetsk: SibGGMA, 1997. pp. 65, 66 (In Russ.).
49. Lyulenkov V.I., Tyryshkin Yu.P., Matekhin N.A., Shinkarenko A.S. Installation for separation of bulk materials. Certifi cate of authorship USSR no. 1238811. 1986, no. 23. (In Russ.).
50. Beresnev S.I., Lyulenkov V.I., Shinkarenko A.S., Abramin G.V. A method for obtaining an internal thread on a hollow metal workpiece. Certifi cate of authorship USSR no. 1827314. 1993, no. 26. (In Russ.).
51. Tyryshkin Yu.P., Lyulenkov V.I., Shinkarenko A.S., Shariga A.D., Lebedev S.N., Kuptsov V.I., Kretinin V.I. Installation for separation of bulk materials. Certifi cate of authorship RF no. 1837999. 1993, no. 32. (In Russ.).
52. Savel'ev A.N. Design of homeostasis rolling complexes. Izvestiya. Ferrous metallurgy. 1991, no. 12, pp. 78–82. (In Russ.).
53. Savel'ev A.N., Gaiduk V.V. Improvement of information support in the maintenance system of technological equipment. Stal'. 1994, no. 6, pp. 82–85. (In Russ.).
54. Savel'ev A.N. On the methodological foundations of the design of reliable technological equipment. Izvestiya. Ferrous metallurgy. 1998, no. 6, pp. 22–26. (In Russ.).
55. Savel'ev A.N., Bosnyak M.L. Features of the formation of workable rolling complexes for the production of blanks. Izvestiya. Ferrous metallurgy. 2005, no. 2, pp. 59–65. (In Russ.).
56. Savel'ev A.N. Structural features of a stable functioning complex technical system. Izvestiya. Ferrous metallurgy. 1996, no. 12, pp. 53–58. (In Russ.).
57. Savel'ev A.N., Timoshenkov Yu.G., Bich T.A. Evaluation of reliability and maintainability indicators of units of a steadily operating technological line of the MNLZ. Izvestiya. Ferrous metallurgy. 2006, no. 6, pp. 57–60. (In Russ.).
58. Savel'ev A.N., Timoshenkov Yu.G., Bich T.A. Modeling the distribution of elements by reliability in continuous casting machines. Izvestiya. Ferrous metallurgy. 2006, no. 8, pp. 46–49. (In Russ.).
59. Savel'ev A.N. Features of the friction mechanism during high-speed impact of a smooth disk on metal. In: Improving the operational reliability of parts and technological tools. Collection of scientific works of MISIS. Moscow: Metallurgiya. 1991, pp. 92–96. (In Russ.).
60. Savel'ev A.N. Features of the mechanism of circulating friction of solids. Izvestiya. Ferrous metallurgy. 1991, no. 4, pp. 101–103. (In Russ.).
61. Savel'ev A.N., Savel'eva N.A. Fundamentals of technological processes for obtaining amorphized tapes based on the effect of circulating friction. Materialy sed'moi nauchno-prakticheskoi konferentsii po problemam mashinostroeniya, metallurgicheskikh i gornykh mashin. Novokuznetsk, 1998, pp. 95–99. (In Russ.).
62. Savel'ev A.N., Savel'eva N.A. Method of ob-taining tapes with an amorphous structure. Patent RF no. 2224801. 2004. (In Russ.).
63. Savel'ev A.N. Mathematical description of the internal processes of the formation of a complex technical system. Izvestiya. Ferrous metallurgy. 1997, no. 8, pp. 52–56. (In Russ.).
64. Savel'ev A.N. Features of the formation of workable technical systems. Izvestiya. Ferrous metallurgy. 1998, no. 8, pp. 69–75. (In Russ.).
65. Savel'ev A.N., Timoshenkov Yu.G., Bich T.A. Identification of the element distribution model in a complex technical system. Izvestiya. Ferrous metallurgy. 2004, no. 6, pp. 64–67. (In Russ.).
66. Saveliev A.N., Bosnyak M.L. Effective rolling systems for dillet. Steel in translation. 2005, vol. 35, no. 2, pp. 40–46.
67. Savel'ev A.N., Kipervasser M. V., Moiseev L.L. Evaluation of the effectiveness of the linear pneumatic supply system. Izvestiya. Ferrous metallurgy. 2008, no. 2, pp. 58–61. (In Russ.).
68. Savel'ev A.N., Timoshenkov Yu.G. The method of forming the time parameters of the functioning of the elements of the MNLZ. Materialy shestnadtsatoi nauchno-prakticheskoi konferentsii po problemam mekhaniki i mashinostroeniya. No-vokuznetsk, 2006, pp. 107–110. (In Russ.).
69. Savel'ev A.N., Oskolkova T.N., Savel'eva N.A. Evaluation of the phase composition and the nature of the change in the lattice parameters of the phases of the amorphized bronze layer AZH9-4. Materialy desyatoi nauchno-prakticheskoi konferentsii po problemam mashinostroeniya i gornykh mashin. Novokuznetsk, 2000, pp. 168–178. (In Russ.).
70. Savel'ev A.N., Lokteva N.A., Bich T.A. Mathematical model of dynamic processes in a circulation friction unit. Materialy odinnadtsatoi nauchno-prakticheskoi konferentsii po problemam mashinostroeniya i gornykh mashin. Novokuznetsk, 2001, pp. 159–163. (In Russ.).
71. Lokteva N.A., Savel'ev A.N. On the characteristics of the oscillatory process in the zone of interaction of the tool with the material during circulation friction. Izvestiya. Ferrous metallurgy. 2008, no. 8, pp. 48–52. (In Russ.).
72. Savel'ev A.N. Equipment operability as a complex criterion. Izvestiya. Ferrous metallurgy. 1991, no. 6, pp. 102–104. (In Russ.).
73. Savel'ev A.N. Using the criterion of op-erability of parts in calculations for du-rability. Izvestiya. Ferrous metallurgy. 1991, no. 10, pp. 84–86. (In Russ.).
74. Savel'ev A.N., Gromov V.E. Influence of the loading frequency on the nature of the distribution of movements in materials. Izvestiya. Ferrous metallurgy. 1999, no. 6, pp. 62–66. (In Russ.).
75. Savel'ev A. N. Theory of operability of technological machines. Kemerovo: Kuzbassvuzizdat, 2008, 225 p. (In Russ.).
76. Dvornikov L.T., Lokteva N.A., Savel'ev A.N. The mechanism of interaction of contacting surfaces during various friction processes. Novokuznetsk: ITs SibGIU, 2006, 74 p. (In Russ.).
77. Savel'ev A.N., Stupakov M.I., Savel'ev N.V. Dynamics of heavily loaded technological machines. Novokuznetsk: ITs SibGIU, 2000, 190 p. (In Russ.).
78. Savel'ev A.N. Fundamentals of the theory of the formation of technological lines and complexes as complex technical systems. Novokuznetsk: ITs SibGIU, 2018, 70 p. (In Russ.).
79. Fastykovskii A.R., Savel'ev A.N. Designs and calculations of equipment for rolling stands of varietal and sheet mills. Novokuznetsk: ITs SibGIU, 2008, 316 p. (In Russ.).
80. Fastykovskii A.R., Savel'ev A.N. Features of the design and trouble-free operation of roll fittings of long mills. Moscow: Teplotekhnik, 2015, 170 p. (In Russ.).
81. Zhukov I.A. A life dedicated to science. Izvestiya Tomskogo politekhnicheskogo universiteta. 2009, vol. 314, no. 2, pp. 159–163. (In Russ.).
82. Dvornikov L. T., Gerasimov S. P. Self-aligning five-satellite planetary trans-mission. Patent RF no. 2622731. 2017, no. 17. (In Russ.).
83. Dvornikov L.T. About fundamental inaccuracies in the research of Prof. Pozhbelko V.I. On the structure of mechanisms. Teoriya mekhanizmov i mashin. 2016, vol. 14, no. 3(31), pp. 145–165. (In Russ.).
84. Nikitin A.G., Abramov A.V., Gredina A.A., Garyashin V.V. Analysis of the operation of the crank joint-the root support of the crank-rocker mechanism of the jaw crusher. Izvestiya. Ferrous metallurgy. 2016, vol. 59, no. 12, pp. 875–878. (In Russ.).
85. Nikitin A.G., Laktionov S.A. Medvedeva K.S. Determination of the drive power of a single-roll crusher. Vestnik mashinostroeniya. 2016, no. 1, pp. 85–86. (In Russ.).
86. Nikitin A.G., Abramov A.V. Improving the reliability of jaw crushers by using elastic pneumatic elements in the joints of kinematic pairs. In: Metallurgy: Technologies, innovations, quality: Proceedings of the XX International Scientific and Technical Conference Ch. 2. Novokuznetsk: ITs SibGIU, 2017, pp. 439–442. (In Russ.).
87. Nikitin A.G., Laktionov S.A., Medvedeva K.S. Diagnosis of the rock crushing model to increase the efficiency of one – roll crusher operation. IOP Conference Series: Earth and Environment Science. 2017, vol. 84, pp. 1–5.
88. Dvornikov L. T., Gudimova L.N., Beresnev D.A. Flat crank-slide mechanism. Patent RF no. 182350. 2018, no. 23. (In Russ.).
89. Kuklin S.A. Analytical calculation of contact angles in rolling bearings. Journal of Advanced Research in the field of Natural Science. 2017, no. 2, pp. 11–28. (In Russ.).
90. Savel'ev A.N., Kozlov S.V., Vinokurov N.E. Dynamic loads influencing on elements of multi-motor hydraulic drive of ccm cooler. Steel in Translation. 2018, vol. 61, no. 2, pp. 149–155.
91. Savel'ev A.N., Kozlov S.V., Zhivago E.Ya., Prokhorenko O.D. Formation of a mathematical model of longitudinal vi-brations arising in a multi-motor hydraulic drive of refrigerators of the MNLZ. Vestnik Sibirskogo gosudarstvennogo industrial'nogo universiteta. 2018, no. 2 (24), pp. 58–64. (In Russ.).
92. Bychkov I.V., Zhukov I.A., Dvornikov L.T. Kinematics of Metallurgical Cutters with Parallel Blades. Steel in Translation. 2019, vol. 49, no. 4, pp. 238–244. (In Russ.).
93. Zhukov I.A., Timofeev E.G. Mathematical and computer modeling of impact processes in the core system of impact machines. Sovremennye naukoemkie tekhnologii. 2020, vol. 1, no. 12, pp. 43–49. (In Russ.).
94. Gudimova L.N., Dvornikov L.T., Makarov A.V., Zhivago E.Ya. Creating a block diagram of a new generation jaw crusher without redundant connec-tions. In: Sovremennye naukoemkie tekhnologii .2021, no. 4, pp. 30–36. (In Russ.).
95. Gudimova L.N., Makarov A.V., Baklushina I.S. On the issue of creating self-aligning mechanisms in metallurgical production. RAE. Sovremennye naukoemkie tekhnologii (Ch.1). 2022, no. 5, pp. 83–87. (In Russ.).
96. Savel'ev A.N., Anisimov D.O., Kartashov R.N. Determination of the dynamic component of stress in the material when implementing the method of synergetic organized emission of stress waves. In: Metallurgy: Technologies, Innovations, quality: Proceedings of the XXII In-ternational Scientific and Practical Confer-ence. Part 2. Novokuznetsk: ITs SibGIU. 2021, pp. 266–272. (In Russ.).
97. Savel'ev A.N., Makarov A.V., Anisimov D.O. Estimation of the dynamic component of the stress in the material during finely stepped tensile loading of the sample. TGiSM. 2022, no. 16, pp. 9–17. (In Russ.).
98. Nikitin A.G., Epifantsev Yu.A., Medvedeva K.S. Mathematical model for determining the number of stops on the roll of a single-roll crushing machine. Izvestiya. Ferrous metallurgy. 2021, vol. 64, no. 12, pp. 909–911. (In Russ.).
99. Kuklin S.A., Adamovich N.O. The use of the Geogebra software package in the study of mechanisms. Sovremennye problemy teorii mashin. 2020, no. 10, pp. 13–17. (In Russ.).
100. Kuklin S.A., Adamovich N.O., Kamko K.D. Making changes to the scheme of the double-acting eight-branch crank press. Nauka, tekhnika i obrazovanie. 2022, no.5 (88), pp. 51–56. (In Russ.).
101. Baklushina I.S., Dvornikov L.T., Ustimenko A.E. Ten - tower construction arch Patent RF no. 2780448. 2022, no. 11. (In Russ.).
102. Gudimova L.N., Baklushina I.S., Makarov A.V. On the issue of creating self-aligning mechanisms in metallurgical production. Sovremennye naukoemkie tekhnologii. Ch. 1. 2022, no. 5, pp. 85–88. (In Russ.).
103. Adamovich N.O., Kuklin S.A., Kuptsov N.V. On the question of the kinematic study of the mechanized support section. Naukosfera. 2021, no. 4–1, pp. 132–137. (In Russ.).
104. Korneev V.A., Korneev P.A., Popugaev M.G., Gusev M.M., Bedarev S.A. Determination of the strength properties of rocks in boreholes. Vestnik Sibirskogo gosudarstvennogo industrial'nogo universiteta. 2020, no. 4 (34), pp. 29–31. (In Russ.).
105. Dvornikov L.T., Popugaev M.G. Eight - rod arch. Patent RF no. 197270. Byulleten' izobretenii. 2020, no. 27. (In Russ.).
Review
For citations:
Yur’ev A., Saveliev A., Konovalov S. SCIENTIFIC SCHOOL OF WESTERN SIBERIA IN THE FIELD OF HEAVY TECHNOLOGICAL EQUIPMENT. Bulletin of the Siberian State Industrial University. 2023;(3):124-140. (In Russ.)
Views:
9
Email this article 